DIGITEN LCD Display Water Flow Control Meter Liquid Quantitative Controller + G1" Water Flow Hall Effect Sensor Flow Meter Flowmeter Counter 1-60L/min + DC 12V Power Adapter

This DFC15 controller is used to measure and control the flow of liquid, it can control solenoid valve on/off when the flow reaches to setting value. It is suitable for hall effect flow sensor. Large LCD screen can display the flow rate, volume, and the temperature of the liquid.FEATURESWater meter: DFC15 can be used to measure the volume of waterAdjustable accuracy: Calibrate the accuracy through adjust the K parameter Temperature monitor: Come with temperature sensor, it can measure liquid temperatureEasy-to-Read Front-Panel Liquid Crystal DisplayTECHNICAL SPECIFICATIONSFor DFC15 Controller:Controller Power Requirement: 12VDCPower Adapter: Input: 100-240VAC; Output: 12VDC, max 2A Adapter lead length: 1m Measuring Accuracy: ±1% Output for Solenoid valve: 12VDC, max 5A Temperature Sensor: 0-125℃/32-257℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8Max Total Volume : 999999 G/L Quantitative Range: 0-9999.99 G/LFlow Rate Range: 0-9999.99/LPM(GPM) Cable Length : 1m Dimensions: 88mmx126mmx30mm Weight: 200g Operation Environment: Temperature: 0-50℃/32-122℉; Relative Humidity: <85% For G1" Flow Sensor:Flow range:1-60L/minAllow compression:Water pressure 1.75 Mpa belowSensor:Hall effectCable length:15cmFrequency: F=4.8 * Q (L / Min)Note:1, This controller work with the solenoid valve up to 5A, but this kit come with 2A power adapter. If drive a large solenoid valve, please use suitable power adapter.2, Ensure the solenoid valve and flow sensor direction is the same with water flow.3, Please use teflon on the thread when requirement, ensure don't leak.4, The wires can be extended up to 10m.5, Avoid the water into the controller.Package includes:1 x DFC15 controller1 x G1" flow sensor1 x Power adapter1 x Temperature sensor1 x Manual

• ★【Large LCD Screen & Monitor Flow Rate】: Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.
• ★【Quantitative Control & Alarm Function】: The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control. It can automatically stop water filling into your concrete mixer. When the total amount reaches the setting value, the controller will alarm.
• ★【Work with All Hall Effect Flow Sensor】: It can work with various different flow sensors through adjust the K value. High quality, come with temperature sensor, it can measure liquid temperature.
• ★【Wide Applications】: Swimming pool, water dispenser, coffee machine, drip irrigation system, home brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liquids other than water.
• ★【Package Includes & Warranty】: Thread type: BSP, but it can work with NPT thread. The controller will come with G1" flow sensor, temperature sensor(it can measure liquid temperature) and 12VDC power adapter. 12 month warranty!