High Clearance Carbon LCG Chassis Kit, for Comp Rigs Custom Crawler Build

Features:Frame rails laser cut from 3mm carbon fiber.Large skid angle for insane breakover and even more available ground clearance.Two sets of skid plate mounting holes, left & right, based on Axial 3-gear transmission or similar.Multiple universal body post mount slots.Multiple front and rear shock mounting positions for optimized shock tuning.Multiple front and rear links mounting options for wheelbase adjustment.Included carrier bearing is still fully adjustable left to right, adjustable pitch, and fwd and back via 4 mounting locations.Includes basic hardware, assembly is required.Chassis Kit Includes:1x Carbon Rails (pair)1x Delrin Skid Plate1x Aluminum Carrier Bearing1x 3D Printed Rock Sliders (pair)2x 70mm Chassis Brace1x 45mm Lower Link Brace1x Nylon Spacers Kit1x Hardware KitNote: these is a custom build application, so be prepared for problem solving as not every axles, motor, transmission that is available on the market can be accounted for all in one.Needed to Complete:-SHOCKS 80mm-90MM respectively for travel needs. No more than 90mm recomended. 82mm PN 2660/big bore shocks are a great comparable budget option as well.-TRANSMISSION compact required. EXO, Tiny Portal or NOD2 and others.-MOTOR smaller is better. Recomend small/stubby outrunner like HOLMES/3BROS/Dlux/SEQURE and others.-3x DRIVESHAFTS recomend "cut to length" in front for thier reduced shaft size for clearance and strength. Larger(normal) diameter plastic shafts can be used in rear no issue to save weight and money.-ESC compact am32 of your choice recomended. DLUX, HOLMES HOBBIES, 3BROS, SEQURE etc.-AXLES, 20% or more total OD recomended. 30% is ideal.-SERVO.

• 3mm laser-cut carbon fiber rails and a large skid angle provide more ground clearance and insane breakover for 1/10 comp crawler builds. The LCG layout helps keep the rig stable on steep, technical lines
• Multiple front and rear shock mounting positions let you optimize shock tuning. Multiple front and rear link mounting options let you adjust wheelbase for different courses and axle setups
• Two sets of left/right skid plate mounting holes fit Axial 3-gear or similar transmissions. The included carrier bearing adjusts left/right, pitch, and fore/aft via 4 mounting locations
• Includes carbon rails, Delrin skid plate, aluminum carrier bearing, 3D-printed rock sliders, 70mm chassis braces, 45mm lower link brace, nylon spacers, and hardware. Universal body post slots add mounting flexibility
• Needed to Complete, compact transmission (EXO, Tiny Portal, NOD2, etc.), small/stubby motor, 80–90mm shocks, 3 driveshafts, compact AM32 ESC, OD axles (30% ideal), and servo. Custom build application; expect fitment checks and problem-solving